Products
| Home → Products → Digital Storage Oscilloscope |
|
Digital Storage
Oscilloscope - DS-1000 series
|
|
 |
|
| ¡D | |
| ¡D | |
| ¡D | |
| ¡D | |
| ¡D | |
| ¡D | |
|
Specifications
|
DS-1302. DS-1202.
DS-1102. DS-1002
|
|
|
Acquistion
|
Mode
|
Real-time sampling,
Equivalent sampling, Roll mode, Average, Envelope
|
|
Input
|
Input Coupling
|
AC, DC, GND
|
|
Input Impedance
|
1MΩ±1%
// 21pF±5%
|
|
|
Max. Input Voltage
|
42Vpk (DC + AC peak)
|
|
|
Vertical
|
Channel
|
DS-1002.DS-1102. DS-1202.
DS-1302: allows to stack up to max. 6 channels
|
|
Vertical Resolution
|
9 bits /channel @ 5mV/DIV-
10V/DIV (8 bits @ 2mV/DIV)
|
|
|
Sensitivity
|
DS-1302.DS-1202.DS-1102:
DC to 200MHz DS-1002: DC to 100MHz
|
|
|
Bandwidth
|
DC to 200MHz/DC to
200MHz/DC to 100MHz
|
|
|
BW Limit
|
Approx. 20MHz
|
|
|
Range
|
8 divisions
|
|
|
Offset Level
|
±4 divisions
|
|
|
Offset Increments
|
0.1 division
|
|
|
DC accuracy
|
±3%
|
|
|
Time Base
|
Sampling Rate
|
DS-1302.DS-1202.DS-1102:
Real-time sampling: 200MS/s @ 1Ch, 100MS/s @2Ch
(Single Shot Equivalent sampling: 5GS/s (Repetitive) DS-1002: Real-time sampling: 100MS/s @ 1Ch, 50MS/ s @2Ch (Single Shot Equivalent sampling: 2.5GS/s (Repetitive) |
|
Time Base Range
|
2ns/DIV to 10s/DIV (as 2-
5-10 step)
|
|
|
Accuracy
|
100ppm
|
|
|
Range
|
10 Divisions
|
|
|
Pre/Post Trigger
|
+/-64k points
|
|
|
Time Resolution
|
200ps
|
|
|
Record Length
|
DS-1102.DS-1002: 2k
points/channel to 64k points/channel
DS-1202: 2k points/channel to 512k points/channel DS-1302: 2k points/channel to 2m points/channel ROLL mode: 32k points/channel (Log Length = Hard Disk limitation) |
|
|
Trigger
|
Type
|
DS-1302.DS-1202.DS-1102:
Rising, Falling, Delay-Trigger, TV-Trigger
DS-1002: no TV Trigger) |
|
Mode
|
Auto, Normal and Single
(With RUN/STOP hardware button on the DSO device) |
|
|
Source
|
CH1, CH2, Ext-Trig
|
|
|
Coupling
|
DC, HF rejection
|
|
|
Sensitivity
|
DC to 25MHz = 0.35div or
3.5mv;
25MHz to Max. = 1.5div or 15mv |
|
|
Trigger Level
|
±4 divisions
|
|
|
Trigger Increments
|
0.1 division
|
|
|
Measurement and Processing
|
Special function
|
Autoset, Monitor from
Internet (TCP/IP)
|
|
Measurement
|
Vp-p, Vmax, Vmin, Vamp,
Vtop, Vbase, Vupper, Vmiddle, Vlower,
Vmean, Vrms, Positive overshoot, Negative overshoot, Period, Frequency, Pulse width |
|
|
Cursor
|
Time difference, Voltage
difference
|
|
|
Math
|
Add, Sub, Multiplication,
Division
|
|
|
FFT
|
Rectangular (Vertical
scale: dbV RMS, Linear RMS)
|
|
|
Export Data
|
WORD, EXCEL, CSV, TEXT,
HTML, Clipboard, Hardcopy, Preview
|
|
|
Trigger Input/Output
|
EXT-TRIG Input Limitation
|
TTL Level
|
|
EXT-TRIG Acknowledge Level
|
1.6V to 5V, rising/falling
edge
|
|
|
EXT-TRIG Acknowledge Freq.
|
">10ns" and
">0.1 TIME/DIV"
|
|
|
TRIG-OUT
|
3.3v pulse, 20ns delay
after trigger occurring
(only for DS-1202 stack function) |
|
|
Calibration Output
|
Level
|
Approx. 3.3V
|
|
Frequency
|
1kHz ±0.5%
|
|
|
Environment
|
Operation
|
0¢J to +50¢J
|
|
Storage
|
-10¢J to +60¢J
|
|
|
Physical
|
Interface
|
USB2.0 (USB1.1 compatible)
|
|
Power
|
USB2.0 (USB1.1 compatible)
|
|
|
Dimension (device only)
|
135/80/26 mm3
|
|
|
Weight (device only)
|
230 g
|
|
|
Accessories
|
Probes
|
DS-1302.DS-1202.DS-1102:
250MHz probe (1x/10x) x2
DS-1002: 100MHz probe (1x/10x) x2 |
|
Others
|
Installation CD, USB2.0
cable, User manual, Soft case
|
|
|
Acquistion
|
Mode
|
Real-time sampling,
Average, Envelope .
Equivalent sampling and Roll mode only available in Master-DSO |
|
Time Base
|
Sampling Rate
|
Real-time sampling:
200MS/s @ 1Ch/DSO, 100MS/s @ 2Ch/DSO
Equivalent sampling: 5GS/s only for Master-DSO |
|
Time Base Range
|
2ns/DIV to 100ms/DIV (as
2- 5-10 step) for Master and Slave DSOs
200ms/DIV to 10s/DIV (Roll mode) only for Master-DSO |
|
|
Trigger
|
Source
|
CH1, CH2, Ext-Trig in
Master-DSO (NA for Slave-DSO)
|
|
Jitter
|
+/- 200ps in Master-DSO;
+/-10ns in Slave-DSO
|
1. INTEL
Pentium 300M CPU or compatible PC (2G recommended)
2. One USB port (USB2.0 recommended)
3. Windows 98/ME/2000/XP/2003/Vista/7 operating system
4. 128M bytes memory (512M recommended)
5. Disk space more than 10M bytes
6. One CD-ROM drive for installation
7. 640x480 VGA or higher (1280x1024 recommended)
8. 101-Keys keyboard
9. Mouse (with wheel recommended)
2. One USB port (USB2.0 recommended)
3. Windows 98/ME/2000/XP/2003/Vista/7 operating system
4. 128M bytes memory (512M recommended)
5. Disk space more than 10M bytes
6. One CD-ROM drive for installation
7. 640x480 VGA or higher (1280x1024 recommended)
8. 101-Keys keyboard
9. Mouse (with wheel recommended)
|
|
DS-1002/DS-1102/DS-1202/DS-1302
|
|
|
Pocket DSO device
|
1
|
|
|
250MHz probes (with 1x/10x
switch)
|
2*
|
|
|
Probe accessories pack
|
2
|
|
|
Stack function cable
|
1
|
|
|
USB2.0 1.8m cable
|
1
|
|
|
Installation CD
|
1
|
|
|
User manual
|
1
|
|
|
DSO soft case
|
1
|
|
*DS-1002
provides 2 pieces of 100MHz probes(1x/10x)