Acute successfully exhibited at the COMPUTEX TAIPEI 2019. It was the first time we moved to Nangang exhibition hall in 2019 from World Trade Center in the past years. Nevertheless, the visiting crowd to our booth were still as many as before.

We announced our latest product, the BusFinder 7264B, a 2-in-1 analyzer (protocol + logic) at the show. The BF7264B has a new feature, MIPI D-PHY HS, over its predecessor, the BF6264B.

MIPI D-PHY analytical features by BF7264B:
．D-PHY V1.2
．Up to 2.5Gbps per lane, 1 (clock) + 4 (data) lanes
．Display DSI 1.3 or CSI-2 1.3 by protocol packet or table
．Resume the video data to image
．Data filter to filter un-needed video data to save more commands

Software window

More details (PDF)

Photo:
2-in-1 Analyzer (Protocol & Logic) Information:
．BusFinder
．TravelLogic
．LogicAnalyzer
．TravelBus

DSO Information:
．TravelScope

Differential Probe Information:
．Differential Probe

Data Generator Information:
．Data Generator
．TravelData

Acute Technology Inc. successfully exhibited at the Embedded World 2019 in Nurnberg, Germany from 26.02~28.02.2019. There were many engineers from Germany and other European countries to visit our booth, many of them use our products and feel good about the hardware design and GUI with free function upgrades.

We released DG3000 series, our new data generators, in the show. There are three models (data output channels/event channels) :
．DG3064B (48/16)
．DG3096B (80/16)
．DG3128B (112/16)

Major features include:
．112 channels (Max.) data output is good for IC/FPGA test/verification.
．56Mb/channel memory: good for output long time data.
．400Mbps data rate with 6 digit resolution is able to generate various precision data.
．0.8V~5V (0.1V interval) output voltage with Hi-Z mode.
．Each channel phase shift.
TB2016B Major features include:
．25 Channels
．Digital : 16 (Data), 1 (Clock)
．Aux. : 2 ( I²C/DP AUX)
．Differential : 2 (CAN2.0/CAN-FD), 4 (RS422/485), Isolated (>1000Vrms)
．200 MHz timing/state analysis
．Memory : PC RAM
．Stackable with Acute TravelScope DSO to form an MSO
Photo:

2-in-1 Analyzer (Protocol & Logic) Information:
．BusFinder
．TravelLogic
．LogicAnalyzer
．TravelBus

DSO Information:
．TravelScope

Differential Probe Information:
．Differential Probe

Data Generator Information:
．Data Generator
．TravelData

Acute demonstrated its TB1016B+ logic & protocol analyzer which offers differential ports with isolation to withstand 1,000V for CAN2.0 and RS485/RS422 signals.
The major applications for the TB1016B+ for IIOT and smart home are:
．RS485: Industrial remote control, Human machine interface, or 4-in-1 smart electronic lock.
．DALI2.0: DALI light remote control
．CAN2.0: Mechanical arms, elevator, car electronics
．MDIO: Network interface control
．PWM/RS485/I2C/UART/SPI: Smart image identification, remote meter reading, …etc.

TB1016B+ is a handy debug tool, friendly GUI with high C/P value.

Setup window for RS485

Setup window for CAN2.0

TB1016B+ is also able to stack with the TS2212H DSO which has 16-bit vertical resolution to display both digital and analog waveforms.

Photo：

2-in-1 Analyzer (Protocol & Logic) Information:
．BusFinder
．TravelLogic
．LogicAnalyzer
．TravelBus

DSO Information:
．TravelScope

Differential Probe Information:
．Differential Probe

Data Generator Information:
．Data Generator
．TravelData

The Microchip 2018 embedded solutions seminars were very successful, the major topics are IoT applications, analog and digital power design applications. Acute TB1016B+ logic analyzer (also a protocol analyzer) with CAN ports and RS485 ports are able to measure differential signals commonly used in IoT applications as sample picture below:

The TB1016B+ has 2 pairs of differential ports which support RS485, ProfiBus, PWM, DALI2.0 debug, allows real-time protocol data streaming observations.
In digital power test, the TravelScope TS2212H DSO with 16-bits vertical resolution, together with the ADP2100 hi-voltage differential probe, will be able to measure the ripple very clear. Acute PC-based test & measurement instruments make debug easy and quick.

Some pictures of the seminars:

2-in-1 Analyzer (Protocol & Logic) Information:
．BusFinder
．TravelLogic
．LogicAnalyzer
．TravelBus

DSO Information:
．TravelScope

Differential Probe Information:
．Differential Probe

Data Generator Information:
．Data Generator
．TravelData