| Option | BF7264B | BF7264B+ |
| eMMC 5.1 | Flying lead cable / Gripper | |
| MIPI D-PHY 1.2 | SMPM Cable / End-tip | |
| NAND Flash | Flying lead cable / Gripper | |
| SD 3.0（SDIO 3.0） | SD 3.0 extender card / SDIO 3.0 extender card & Flying lead cable | |
| SD 4.1 | SD 4.0 extender card (covers SD 3.0) | |
| UFS 2.1 | --- | Con Fixture / SMPM Cable / End-tip |
| Logic Analyzer | Flying lead cable / Gripper | |
￭ Protocol Analyzer: eMMC 5.1, MIPI D-PHY 1.2, NAND Flash, SD 3.0 (SDIO 3.0), SD 4.1 (UHS-II), UFS2.1 (BF7264B+ Only)
• Real-time data display, post-capture waveforms
• Trigger for commands or data
• Different active probes for different protocols for easier connections
• Filter data to save more commands
• Hide data for easy reading
• Search data for quick finding
• Statistics for commands and data
• Two voltage detects to find design bugs from voltage drop
• Use PC hard disk (SSD) to log long time data
• Protocol monitor like dash camera for long time surveillance (months)
￭ Logic Analyzer: eMMC 5.1, NAND Flash, SD 3.0 (SDIO 3.0), Serial Flash, SPI
• 2.4GHz timing analysis
• 8-state flow chart bus triggers
• Bus decodes with waveforms
• Stacks with a DSO to form as an MSO
BusFinder Optional Solutions
- LA-Pod Solution:
Accessories Description 
1. LA08-tip: 8 Data Channel
2. LA09-tip: 8 Data Channel + 1 CLK Channel
3. Operation Voltage: -1V~8V
4. Timing Analysis: 2.4 GHz
Software:
- eMMC 5.1 Solution:
Accessories Description 
1. LA04 (B)-tip: 4 Data Channel
2. eMMC-tip: 12 Data Channel + 2 Analog Channel
3. Auto Data Phase Tuning
4. 3 Pin Mode: CMD, CLK, D0
Software:
1. Settings
2. Data Phase Tuning
3. Decode:
- SD 3.0 (SDIO 3.0) Solution:
Accessories Description 
1. LA04 (B)-tip: 4 Data Channel
2. SD3.0(SDIO 3.0)-tip: 12 Data Channel + 2 Analog Channel
3. Auto Data Phase Tuning
4. 3 Pin Mode: CMD, CLK, D0
Software:
1. Settings
2. Data Phase Tuning
3. Decode
- SD 4.1 (UHS II) Solution:
Accessories Description 
1. LA04 (B)-tip: 4 Data Channel
2. SD4.1 & uSD4.1-tip: 6-SE / 3-Diff / 2-Analog Channel
(*SE=Single Ended, Diff=Differential Pair)
Software:
1. Settings
2. Decode
- NAND Flash Solution:
NAND Flash Solution Accessories Description 
1. LA08-tip: 8 Data Channel
2. LA09-tip: 8 Data Channel + 1 CLK Channel
3. NAND-tip: 4 Data Channel + 2 Analog
4. Support IC Vendors:
Hynix, Intel Micron, Samsung, ST, Toshiba, Winbond, Macronix,
Cypress(Spansion), ONFI, Dosilicon, ESMT, Zetta, GD
( *Customized Available )
Software:
1. Settings
2. Decode
- SGMII Solution:
SGMII Solution Accessories Description 
1. Way Station: 2-Diff(TX / RX) + 1 Ref. CLK
( *Diff=Differential Pair )2. Support Ethernet Speed: 1Gbps, 100Mbps, 10Mbps
3. Support MAC & PCS Decode
Software:
1. Settings
2. Decode
- D-PHY Solution:
Accessories Description 
1. MIPI CSI & DSI Decode
2. Way Station: 5-Diff (CLK, D0, D1, D2, D3)
( *Diff=Differential Pair )3. Support D-PHY V1.2
(Up to 2.0Gbps per Lane，1+4 Lanes)4. DSI CSI Display: Includes RGB、YCbCr、RAW and
Compressed Packet(DSC)5. Porch Statistics
Software:
1. Settings
DSI CSI 
2. Decode
3. Image Recovery
Image Porch 
- UFS2.1(BF7264B+ Only) Solution:
Accessories Description 
1. Way Station: 2 Lanes 4-Diff(TX0, TX1, RX0, RX1)
( *Diff=Differential Pair )2. UFS-tip: 4 Data Channel + 2 Analog Channel
3. Support UFS2.1 Gen-3: 5.8Gbps per Lane
4. Unipro & UFS Decode
Software:
1. Settings
2. Decode
￭ Certification