Application: Amplifier, microphone and audio encoder for smartphones, tablets and other devices.
Signal: CLK, DATA
Voltage: 1.2V or 1.8V

Contact us

Application: Power management on mobile phone
Signal: SCLK, SDATA
Voltage: 1.2V / 1.8V

Contact us

MMC (Multimedia Card)
eMMC (Embedded Multimedia Card) 5.1
Application: MMC
Signal:CLK, CMD, DATA0-7
Voltage: 3V

Download

Application: Electronic control system
Signal: Modbus

Download

Application: NAND Flash memory
Signal: D0-D7(8 bit), D0-D15(16 bit), CLE1/CLE2,
ALE1/ALE2, WE1/WE2, RE1/RE2, CE1/CE2/CE3/CE4, R/B1, R/B2, R/B3, R/B4

Download

Application: Remote Control
Signal: IR Signal

Download

PECI 3.0 (Platform Environment Control Interface)
Application: Microprocessor
Signal: Data

Contact us

PMBus (Power Management Bus)
Application Power System:
Signal: SCK, SDA
Voltage: Defined by IC spec

Download

PMBus with Adaptive Voltage Scaling
Application: Power management
Voltage: 3.3V

Contact us

ProfiBus (Process Field Bus)
Application: Automation control
Signal: PofiBus
Voltage: -7V ~+12V

Download

PS/2 (Personal System/2)
Application: Keyboard or Mouse Device
Signal: CLK, DATA
Voltage: 5V

Download

Application: Power Contolling
Signal:RPM/Temperature/brightness Control

Download

QEI (Quadrature Encoder Interface)
Application: Motor Feedback
Signal: QEA, QEB, INDX

Download

Application: Wireless charger
Voltage: 3.3V

Download

Philips RC-5
Application: Remote Control
Signal: S1, S2, Toggle0, Toggle1, Address, Command

Download

Application: Remote Control
Signal: IR Signal

Download

Application: Video
Signal: Clock/Sync/Data
Voltage: 3.3V

Download

Richtek Single-Wire Interface
Application: Battery monitor
Voltage: 0.8V-1.4V

Download

S/PDIF (Sony/Philips Digital Interconnect Format)
Application: Digital Audio
Voltage: 2.0V and 2.4V

Download

SDIO (Secure Digital Input/Output) 3.0
SD (Secure Digital Memory Card) 3.0
Application: SD card
signal: CLK, CMD, Data0~3
Voltage: 3V

Download

Application: Serial EPROM
Voltage: 3.3V
Support: TI EPROM (bq2022, bq2024, bq2025, bq2026)

Contact us

Application: Serial NOR Flash Storage
Signal: SCLK, CS# D0-D7
Voltage: 3.3V-1.8V
Support: Single, Dual, Quad, Octal Mode

Download

Application: Serialized IRQ is provided for communicating IRQ status between ISA legacy components, PCI components, and PCI system controllers.
Signal: CLK, IRQ

Download

Serial General Purpose Input/Output
Application: SGPIO is interpreted into states for drives or slots on a backplane.
Voltage: 3.3V

Download

Application: Credit card
Signal: CLK, DATA
Voltage: 3V

Download

SMBus (System Management Bus) 3.1
Application: Battery、Sensor、EEPROM
Signal: SMBCLK, SMBDATA
Voltage: 3V

Download

SMI (Serial Microprocessor Interface)
Application: Video
Voltage: 3.3V

Download

SPI (Serial protocol interface)
Application: Serial Falsh and Peripherals
Signal: SCK, CS, SDA
Voltage: Defined by IC spec

Download

Application: NAND Flash storage
Signal: SCLK, CS#, SI, SO, WP#, HOLD#
Voltage: 3.3V-1.8V

Download

SSI (Synchronous Serial Interface)
Application: DSP
Signal: SCK, FS, DATA
Voltage: Defined by IC spec

Download

Application: LCD
Signal: /CS, SCL, MPU SI, LCD SI, A0
Voltage: 3.3V

Download

Application:AMD Serial VID
Signal:SVC, SVD, SVT
Voltage :1V~1.1V

Contact us

Application: Intel VR14/IMVP9, SerialVID (Revision 1.93)
Signal: SCLK, SData, Alert
Voltage: 1V~1.1V

Contact us

Application: IC Boundary Scan, CPU,DSP,CPLD/FPGA
Signal: CLK, SWDIO

Download

SWIM (Single wire interface module)
Application: The STM8 8-bit MCUs debug system
Signal: SWIM , Rst
Voltage: 3.3V

Contact us

Application: Link SIM card and NFC
Signal: S1, S2
Voltage: 3.3V

Download

UART (Universal asynchronous receiver/transmitter), RS232C/RS485/RS422
Application: Peripherals
Signal: TX, RX
Voltage: 3.3V or 5V

Download

Application: EEPROM
Voltage: 3.3V

Download

USB 1.1 (Universal Serial Bus 1.1)
Application: Peripherals
Signal: D+, D-
Voltage: 5V

Download

USB PD 3.0 (USB Power Delivery 3.0)
Application: It can be a power supply or recharging in notebook / tablet PC / mobile phone / power bank which have a USB Type-C connector
Signal: Configuration Channel (CC)
Voltage: 1.1V

Contact us

Application: Electronic entry system
Voltage: 3.3V

Download