Popular Keywords

TL4134B Logic Analyzer

TravelLogic Logic Analyzer

• PC-based
• USB3.0 interface
• 34 channels
• 2 GHz Timing / 250MHz State Analysis
• 4Gb Memory
• Stacks with Acute or another DSO to form as an MSO

Related Products

The TravelLogic 4000 series is an upgraded version of TL2000/TL3000, featuring improved memory size and channel counts. It includes both Logic Analyzer Mode and Protocol Analyzer Mode for bus analysis and decoding. This enables TL4134B to support various communication protocols, such as MIPI RFFE and MIPI SPMI.

TL4134B supports MIPI RFFE (Radio Frequency Front-End Interface) and MIPI SPMI (System Power Management Interface); MIPI RFFE is used for data transmission and communication management between radio frequency chips and radio frequency front-end devices. MIPI SPMI, on the other hand, is used for communication between the main control chip and the Power Management Integrated Circuit (PMIC), effectively managing system power.

MIPI RFFE (LA Mode):


MIPI SPMI (LA Mode):

Logic Analyzer (LA) Mode

• Capture digital waveforms and support bus decodes. Able to stack with a DSO to form as an MSO.

• Provides multiple storage modes, users could select to have long time recording or precision acquisition.


• Long Time Record: Transitional Storage VS Compressed Storage

For signal capture and analysis, usually require to record the signal for a long time. If the data is stored in a compressed way, it will cause your software to lag or even stop functioning when decompressing the data after it is sent back to the computer. Because PC memory size might insufficient for decompressed data size. To satisfy the requirement of smooth software operation and long-term recording without missing any data, the storage method adopted by the Acute analyzer is transitional storage rather than compression. After returning to the PC software, it doesn"t need to do the decompression. The decoded results can be displayed while the analysis is finished.

    Flow chart bus triggers

    Power trigger for serial bus, 8-states flow chart setting with Counter/Timer

    Detail parameters for each states

    Stack With Other Vendors of Oscilloscope

    Protocol Analyzer (PA) Mode
    It is hardware decoding, may log protocol data very long time if without waveforms. Application timing: Preliminary protocol debug.

    Protocol Analyzer
    Show real-time protocol data.
    Application timing: massive protocol data with some idles in between.

    Protocol Logger
    Like data logger, save massive data into SSD hard drive.
    Application timing: massive protocol data.

    Protocol Monitor
    Like dash cameras, record protocol data by the device’s memory only.
    Application timing: trigger event only happens in very long time.

    LA Spec.
    Power Source
    USB bus-power (+5V)
    Static Power Consumption
    0.8W
    Max Power Consumption
    3W
    Hardware Interface
    USB 3.0
    Timing Analysis (Asynchronous,Max. Sample Rate)
    2GHz
    State Clock Rate (Synchronous,External Clock)
    250MHz
    Storage
    Conventional Timing, Transitional Timing
    Channels
    34
    Total Memory
    4Gb
    Timing Analysis
    Available Chs (Conventional / Transitional Timing) - Memory per Ch
    4GHz Timing [Available Chs] - Memory per Ch
    2GHz Timing [Available Chs] - Memory per Ch
    [8/7]-512Mb
    1GHz Timing [Available Chs] - Memory per Ch
    [16/14]-256Mb
    500MHz Timing [Available Chs] - Memory per Ch
    [32/28]-128Mb
    250MHz Timing [Available Chs] - Memory per Ch
    [32/32]-128Mb
    Channel to channel skew
    < 1ns
    Input impedance
    200KΩ//<7pF
    Max. (Non-destructive)
    ±30V DC, 12Vpp AC
    Input operation
    ±10V
    Input sensitivity
    0.25Vpp @50MHz, 0.5Vpp @150MHz, 0.8Vpp @250MHz
    Threshold group
    4 (ch0~7, ch8~15 & clk0, ch16~23, ch24~31 & clk1)
    Threshold range
    ±5V
    Threshold resolution
    50mV
    Threshold accuracy
    ±100mV + 5%*Vth
    Trigger resolution
    500ps
    Trigger types
    Channel, Pattern, Single / Multi Level, Width, Time-out, Setup / Hold Timing Violation, External, Manual
    Protocol Trigger
    BiSS-C, CAN2.0B/CAN FD, DALI, DP_Aux, HID over I2C, I2C, I2S, LIN2.2, LPC, MDIO, Mini/Micro LED, MIPI I3C 1.1, MIPI RFFE 3, MIPI SPMI 2, Modbus, PMBus, Profibus, PWM, SENT, SMBus, SPI, SVI2, UART (RS232), USB PD 3, USB1.1
    Protocol Analyzer
    BiSS-C, CAN2.0B/CAN FD, DALI, DP_Aux, HID over I2C, I2C, I2S, LIN2.2, MDIO, MIPI I3C 1.1, MIPI RFFE 3, Modbus, PMBus, Profibus, PWM, SMBus, SPI, UART (RS232), USB PD 3, USB1.1
    [Specifications] TravelLogic series
    [Manual] TravelLogic series
    [Software] TL4000 series
    [Driver] USB 3.0 driver
    [SDK] Protocol Decode (C++)
    [SDK] TravelLogic (C++/ C#/ LabVIEW)
    [SDK] LA AqLAVISA

    We use cookies to elevate your user experience and enhance the quality of our site. To find out more or adjust cookie settings, click here .