MSO Enables Digital & Analog Channels
(Using the same channels)
Digital & Analog Signals From MSO and External DSO From Other Vendors
*[1]: Decode & Digital Signals；*[2]: MSO Analog Signals；*[3]: External DSO Signals
Stack With Other Vendors of Oscilloscope
Flow chart bus triggers
Power trigger for serial bus, 8-states flow chart setting with Counter/Timer
Detail parameters for each states
Analog waveform
Input Sensitivity: 2mV/div to 10V/div; Max. Sampling Rate: 1GS/s @ 1Ch
Can be used with High Voltage probe, Differential probe or Current probe.
Digital waveform
Operation Range: ±30V
Max. Timing Analysis: 2GS/s @ 8Ch
Logic Analyzer (LA) Mode
• Capture digital waveforms and support bus decodes. Able to stack with a DSO to form as an MSO.
• Provides multiple storage modes, users could select to have long time recording or precision acquisition.
• Long Time Record: Transitional Storage VS Compressed Storage
For signal capture and analysis, usually require to record the signal for a long time. If the data is stored in a compressed way, it will cause your software to lag or even stop functioning when decompressing the data after it is sent back to the computer. Because PC memory size might insufficient for decompressed data size. To satisfy the requirement of smooth software operation and long-term recording without missing any data, the storage method adopted by the Acute analyzer is transitional storage rather than compression. After returning to the PC software, it doesn"t need to do the decompression. The decoded results can be displayed while the analysis is finished.
Measurement
More than 20 types of waveform measurements with customized threshold settings features, provides real-time update for vertical, time and channel to channel timing measurements with statistic features.
Time：Frequency, Period, ±Duty, ±Period, Rise/Fall Time, Delay, Phase
Vertical：VMax, VMin, VHigh, VLow, Vpp, VAmp, VMid, VMean, VRMS, ±Overshoot, Rise/Fall Preshoot
Counter：Edge Count, ±Pulse Count
Math：Add, Subtract, Multiple, Divide, XY, Absolute, Square Root, LogA, LnA, Exponential, Integral
Digital Voltmeter, DVM
Provides voltage root-mean-square, voltage average and frequency counter function for the selected channel.
Measure 1 KHz, 2.5 Vpp square waveforms by the measurement function.
Measure 1 KHz, 2.5 Vpp square waveforms by the DVM function.
Vertical Offset & Zone View
Voltage division from 2mV/Div - 10V/Div combined with the channel independent Vertical Offset settings, which can be used for glitch measurement and analysis on DC power, and observing the ripple and overshooting voltage on DC offseted voltage. It is also possible to use 16Bit high vertical resolution mode (TS3124H/V) with the Zone View feature to observe the DC voltage and ripple signal together in the same time.
Multiple Windows
Multiple Window feature provides 4 display types (1x1, 2x1, 1x2, 2x2), which could displays 16 channels in maximum 4 different windows, provides clear waveform readability without lower the vertical resolution.
Spectrum analysis (Fast Fourier transform, FFT)
Apply FFT to the selected channel.
Runt Trigger - Positive Runt
Use 2 voltage thresholds and pulse width to trigger on either/ ±runt signals.
Runt Trigger - Negative Runt
Timeout Trigger
Trigger when no pulse is detected within a specified time, range from 2ns to 50s.
Width Trigger
Pulse width range from 8ns to 50s.
Decode the I2C waveforms
Decode the differential CAN signals with a differential probe. (CH1: Differential Probe, CH2: CAN H, CH3: CAN L)
※ Supports CAN-FD, CAN2.0
Protocol Analyzer
Show real-time protocol data.
Application timing: massive protocol data with some idles in between.
Protocol Logger
Like data logger, save massive data into SSD hard drive.
Application timing: massive protocol data.
Protocol Monitor
Like dash cameras, record protocol data by the device’s memory only.
Application timing: trigger event only happens in very long time.
±15 V @ 0.2, 0.5, 1 V/div;
±1.5 V @ 2, 5, 10, 20, 50, 100 mV/div