Functions:
– Supports SD 3.0 SDR104 / SD6.0 Legacy mode SDR104, DDR200/ SDIO 3.0
– 3-Pin Mode:If you only need to analyze the waveform data of CMD and BUSY, 3-Pin Mode will be a good choice. You do not need to connect all the pins in the measurement. You only need to connect the CLK, CMD, and D0 pins to measure the CMD data.
– No Clk Mode:If you need to record the CMD waveform data for a long time, you can ONLY connect CMD pin. Then you can do the CMD analysis with transitional storage.
Description:
– The order to record all data flow from Low Power Mode to High-Speed Mode.
– “Data Filter” filters unwanted data to save memory.
– “Search” searches specific data.
– “CRC Packet” displays and counts CRC
– Can display SD6.0 Legacy mode / SD 3.0 protocol packet data in tabular form, including command parsing
– SD6.0 Legacy mode / SD 3.0 command statistics include numbers of packets, individual command, different data length, and errors
– SD6.0 Legacy mode / SD 3.0 command trigger
– SD6.0 Legacy mode Command Queue
– Support SDR12、SDR25、SDR50、SDR104、DDR50、DDR200
*BusFinder provides 3 different kinds of adaptors which you can choose